Search Results - "citadel"



Citadel Envelope 2000 (MCM)


Panel Systems > Shop Fabricated ACM-MCM

Envelope 2000® is a fabricated wall system utilizing a composite panel made by laminating a prefinished aluminum skin to a substrate of thermoset phenolic resin. A second aluminum skin is added as a backer and provides thermal stability and panel balance. Panels are furnished with a strippable film on the painted surfaces to protect the finish during shipment and installation. Envelope 2000® is fabricated and then attached to the substrate with a series of aluminum extrusions. The three basic attachment methods for Envelope 2000® are the Reveal System (RV) utilizing one piece extruded aluminum moldings, the Rout & Return System (RR) with formed ‘pans’ and attachment extrusions and the RainScreen System (RS) utilizing formed ‘pans’, attachment extrusions and featuring ‘dry’ joints.

View More...

Citadel Panel 15


Panel Systems > Field-Assembled Cladding

Panel 15® is a composite panel for exterior use made by laminating a textured aluminum skin to a substrate of exterior grade douglas fir plywood. A fiberglass reinforced kraft/foil scrim backer is added for panel balance and acts as a moisture barrier. Panels are furnished with a strippable film (or interleafed microfoam) on the painted surfaces to protect the finish during shipment and installation. The panel is mechanically fastened to the substrate (or wood/metal studs) and the system is completed using trim moldings (one and two piece aluminum extruded moldings) with various profile options.

View More...

Citadel Panel 20


Panel Systems > Field-Assembled Cladding

Panel 20® is a composite panel for exterior use made by laminating an aluminum skin to a substrate of thermoset phenolic resin. A second aluminum skin is added as a backer and provides thermal stability and panel balance. Panels are furnished with a strippable film on the painted surfaces to protect the finish during shipment and installation. Panel 20® is attached to the substrate using construction adhesive in the field of the panel and mechanical fasteners around the perimeter. The system is completed using two piece (plastic receiver and extruded aluminum cover) trim moldings available in both batten and reveal (1/2”) profiles.

View More...

Citadel ProCore


Panel Systems > Field-Assembled Cladding

ProCore™ is a composite panel made by laminating either textured or smooth prefinished aluminum skins to a core of high density polypropylene. A second aluminum skin is added as a backer and provides panel balance. Panels are furnished with a strippable film (or interleafed microfoam) on the painted surfaces to protect the finish during shipment and installation. ProCore™ is attached to the substrate using either mechanical fasteners or construction adhesive, depending upon the method selected. Joints are finished using one piece or two piece extruded aluminum trim moldings.

View More...

Citadel SinoCore


Panel Systems > Field-Assembled Cladding

SinoCore® is a composite panel made by laminating either textured or smooth prefinished aluminum skins to a core of high density polypropylene. A second aluminum skin is added as a backer and provides panel balance. Panels are furnished with a strippable film (or interleafed microfoam) on the painted surfaces to protect the finish during shipment and installation. SinoCore® is attached to the substrate using either mechanical fasteners or construction adhesive, depending upon the method selected. Joints are finished using one piece or two piece extruded aluminum trim moldings.

View More...

Citadel GlazeGuard 1000 IR


Panel Systems > Glazing Infill Panels

GlazeGuard® 1000 IR is a composite panel made by laminating either textured or smooth aluminum skins (or porcelain enamel steel) to three layers of polypropylene. Panels are furnished with a strippable film (or interleafed microfoam) on the painted surfaces to protect the finish during shipment and installation. GlazeGuard® 1000 is installed in aluminum glazing/storefront channels (typically on setting blocks) and sealed using gaskets. No mechanical fasteners or adhesives are used in the installation of the panel.

View More...

Citadel GlazeGuard 1000 WR Plus


Panel Systems > Glazing Infill Panels

GlazeGuard® 1000 WR Plus is a composite panel made by laminating either textured or smooth aluminum skins to high density polypropylene stabilizers. These plastic stabilizers surround a core of expanded polystyrene or polyisocyanurate foam. Panels are furnished with a strippable film (or interleafed microfoam) on the painted surfaces to protect the finish during shipment and installation. GlazeGuard® 1000 WR Plus is installed in aluminum glazing/storefront channels (typically on setting blocks) and sealed using gaskets. No mechanical fasteners or adhesives are used in the installation of the panel.

View More...

Citadel GlazeGuard 1000 WR


Panel Systems > Glazing Infill Panels

GlazeGuard® 1000 WR is a composite panel made by laminating either textured or smooth aluminum skins to high density polypropylene stabilizers. These plastic stabilizers surround a core of expanded polystyrene or polyisocyanurate foam. Panels are furnished with a strippable film (or interleafed microfoam) on the painted surfaces to protect the finish during shipment and installation. GlazeGuard® 1000 WR is installed in aluminum glazing/storefront channels (typically on setting blocks) and sealed using gaskets. No mechanical fasteners or adhesives are used in the installation of the panel.

View More...

Citadel GlazeGuard 1000


Panel Systems > Glazing Infill Panels

GlazeGuard® 1000 is a composite panel made by laminating either textured or smooth aluminum skins to hardboard (or equivalent) substrates. These stabilizers surround a core of expanded polystyrene or poly-isocyanurate foam. Panels are furnished with a strippable film (or interleafed microfoam) on the painted surfaces to protect the finish during shipment and installation. GlazeGuard® 1000 is installed in aluminum glazing/storefront channels (typically on setting blocks) and sealed using gaskets. No mechanical fasteners or adhesives are used in the installation of the panel.

View More...

Citadel GlazeGuard 250 WR


Panel Systems > Glazing Infill Panels

View More...

Citadel GlazeGuard 250


Panel Systems > Glazing Infill Panels

GlazeGuard® 250 is a composite panel made by laminating either textured or smooth aluminum skins to a hardboard (or equivalent) substrate. Panels are furnished with a strippable film (or interleafed microfoam) on the painted surfaces to protect the finish during shipment and installation. GlazeGuard® 250 is installed in aluminum glazing/storefront channels (typically on setting blocks) and sealed using gaskets. No mechanical fasteners or adhesives are used in the installation of the panel.

View More...

Citadel EnviroGuard GYP


Panel Systems > Sanitary Panels

EnviroGuard™ GYP is a composite panel for interior use made by laminating a fiberglass reinforced plastic (FRP) or high density polyethylene (HDPE) skin to a substrate of gypsum board. EnviroGuard™ GYP is attached to the substrate (or studs) using construction adhesive in the field of the panel and mechanical fasteners around the perimeter. The system is completed with one piece or two piece plastic (PVC) trim moldings.

View More...

Citadel EnviroGuard HDP


Panel Systems > Sanitary Panels

EnviroGuard™ HDP is a composite panel for interior use made by laminating a fiberglass reinforced plastic (FRP) or high density polyethylene (HDPE) skin to a substrate of high density polypropylene. EnviroGuard™ HDP is attached to the substrate using construction adhesive in the field of the panel and mechanical fasteners around the perimeter. The system is completed with one piece or two piece plastic (PVC) trim moldings.

View More...

Citadel EnviroGuard LUA


Panel Systems > Sanitary Panels

EnviroGuard™ LUA is a composite panel for interior use made by laminating a fiberglass reinforced plastic (FRP) or high density polyethylene (HDPE) skin to a luaun substrate. EnviroGuard™ LUA is attached to the substrate using construction adhesive in the field of the panel and mechanical fasteners around the perimeter. The system is completed with one piece or two piece plastic (PVC) trim moldings.

View More...

Citadel EnviroGuard OSB


Panel Systems > Sanitary Panels

EnviroGuard™ OSB is a composite panel for interior use made by laminating a fiberglass reinforced plastic (FRP) or high density polyethylene (HDPE) skin to a substrate of oriented strand board (OSB). EnviroGuard™ OSB is attached to the substrate (or studs) using construction adhesive in the field of the panel and mechanical fasteners around the perimeter. The system is completed with one piece or two piece plastic (PVC) trim moldings.

View More...

Citadel EnviroGuard Ply


Panel Systems > Sanitary Panels

EnviroGuard™ PLY is a composite panel for interior use made by laminating a fiberglass reinforced plastic (FRP) or high density polyethylene (HDPE) skin to a substrate of douglas fir plywood. EnviroGuard™ PLY is attached to the substrate (or studs) using construction adhesive in the field of the panel and mechanical fasteners around the perimeter. The system is completed with one piece or two piece plastic (PVC) trim moldings.

View More...

Citadel CleanCote BioWall


Panel Systems > Cleanroom Panels

CleanCote® BioWall® is a composite panel for interior use with a thermoset phenolic resin core. This core is surrounded by two skins of smooth or suede finish melamine. The panel is attached to the substrate (or wood/metal studs) using either mechanical fasteners and construction adhesive. Panel joints are trimmed using two piece (plastic receiver and aluminum cover) extruded moldings.

View More...

Citadel CleanCote Guardian


Panel Systems > Cleanroom Panels

CleanCote® Guardian™ is a composite panel for interior use made by laminating a smooth aluminum skin (or porcelain enamel steel) to a substrate of Type-X gypsum board. Panels are furnished with a strippable film on the painted surfaces to protect the finish during shipment and installation. CleanCote® Guardian™ panels are attached to the substrate (or wood/ metal studs) using mechanical fasteners and/or construction adhesive. Panel joints are trimmed using two piece (plastic receiver and aluminum cover) extruded moldings.

View More...

Citadel CleanCote Premier


Panel Systems > Cleanroom Panels

CleanCote® Premier™ is a composite panel for interior use made by laminating a smooth aluminum skin to a substrate of thermoset phenolic resin. A second aluminum skin is added as a backer and provides thermal stability and panel balance. Panels are furnished with a strippable film on the painted surfaces to protect the finish during shipment and installation. CleanCote® Premier™ is attached to the substrate using construction adhesives in the field of the panel and mechanical fasteners around the perimeter. The system is completed using two piece (plastic receiver and extruded aluminum cover) moldings.

View More...

Citadel CleanCote Sentinel


Panel Systems > Cleanroom Panels

CleanCote® Sentinel™ is a composite panel for interior use made by laminating a prefinished smooth aluminum skin to a thermoset phenolic resin core. A high density polypropylene material is added as a backer. Panels are furnished with a strippable film on the painted surfaces to protect the finish during shipment and installation. CleanCote® Sentinel™ is attached to the substrate using construction adhesives in the field of the panel and mechanical fasteners around the perimeter. The system is completed using two piece (plastic receiver and extruded aluminum cover) moldings.

View More...

Citadel CleanCote Xylem


Panel Systems > Cleanroom Panels

CleanCote® Xylem® is a composite panel for interior use made by laminating a textured aluminum skin to a substrate of douglas fir plywood. A fiberglass reinforced kraft/foil scrim backer is added for panel balance and acts as a moisture barrier. Panels are furnished with a strippable film on the painted surfaces to protect the finish during shipment and installation. CleanCote® Xylem® is attached to the substrate using construction adhesives in the field of the panel and mechanical fasteners around the perimeter. The system is completed using two piece (plastic receiver and extruded aluminum cover) moldings.

View More...